Kubota — SERVICING

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Piston Ring Gap 1. Insert the piston ring into the lower part of the liner (the least worn out part) with the piston. 2. Measure the ring gap with a feeler gauge. 3. If the gap exceeds the allowable limit, replace the ring. W1032246 S-88 KiSC issued 07, 2008 A Top ring Factory spec. D1503-M V2003-M V2403-M-T D1803-M-DI V2403-M-DI V2403-M-DI-T V2003-M-BG V2003-M-T-BG 0.20 to 0.35 mm 0.0079 to 0.013 in. D1703-M D1803-M V2203-M V2403-M D1703-M-BG V2203-M-BG V2403-M-BG 0.25 to 0.40 mm 0.0099 to 0.015 in. Allowable limit 1.25 mm 0.0492 in. Second ring Factory spec.

D1503-M D1703-M D1803-M V2203-M V2403-M D1803-M-DI V2403-M-DI D1703-M-BG V2003-M-BG V2203-M-BG V2403-M-BG 0.30 to 0.45 mm 0.012 to 0.017 in. V2003-M V2403-M-T V2403-M-DI-T V2003-M-T-BG 0.40 to 0.55 mm 0.016 to 0.021 in. Allowable limit 1.25 mm 0.0492 in. Oil ring Factory spec. D1503-M D1703-M D1803-M V2003-M V2203-M V2403-M V2403-M-T V2403-M-DI-T D1703-M-BG V2003-M-BG V2003-M-T-BG V2203-M-BG V2403-M-BG 0.25 to 0.45 mm 0.0099 to 0.017 in. D1803-M-DI V2403-M-DI 0.20 to 0.40 mm 0.0079 to 0.015 in. Allowable limit 1.25 mm 0.0492 in.