Kubota — SERVICING

03-M-E3B, 03-M-DI-E3B, 03-M-E3BG WSM DIESEL ENGINE Commutator and Mica 1. Check the contact of the commutator for wear, and grind the commutator with emery paper if it is slightly worn. 2. Measure the commutator O.D. with an outside micrometer at several points. 3. If the minimum O.D. is less than the allowable limit, replace the armature. 4. If the difference of the O.D.'s exceeds the allowable limit, correct the commutator on a lathe to the factory specification. 5. Measure the mica undercut. 6. If the undercut is less than the allowable limit, correct it with a saw blade and chamfer the segment edges.

(1) Segment (2) Depth of Mica (3) Mica (a) Correct (b) Incorrect W1112444 S-98 KiSC issued 07, 2008 A Commutator O.D. Factory spec. D1503-M D1703-M V2003-M V2203-M D1803-M-DI D1703-M-BG V2003-M-BG V2003-M-T-BG V2203-M-BG 30.0 mm 1.18 in. D1803-M V2403-M V2403-M-T V2403-M-DI V2403-M-DI-T V2403-M-BG 35.0 mm 1.38 in. Allowable limit D1503-M D1703-M V2003-M V2203-M D1803-M-DI D1703-M-BG V2003-M-BG V2003-M-T-BG V2203-M-BG 29.0 mm 1.14 in. D1803-M V2403-M V2403-M-T V2403-M-DI V2403-M-DI-T V2403-M-BG 34.0 mm 1.34 in. Difference of O.D.’s Factory spec. Less than 0.02 mm 0.0008 in. Allowable limit 0.05 mm 0.002 in.