. OPERATION TROUBLESHOOTING STARTING ENGINE WITH BOOSTER CABLE When starting the engine with a booster cable, do as follows: PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING (+) (-) 3 - 182 When connecting the cables, never contact the positive (+) and nega (-) terminals. When starting the engine wit h a booster cable, wear safety glasses rubber gloves. Be careful not to let the norm al machine and problem machine con each other. This prevents sp arks from generating near the battery w could ignite the hydrogen ga s given off by the battery.
Make sure that there is no mistake in the booster cable connectio The final connection is to the engine block of the problem machine, sparks will be generated whe n this is done, so connect to a place as as possible from the battery . When disconnecting the boo ster cable, take care not to bring the c in contact with each other or with the machine body. NOTICE e and clip should be suitable for the battery size. achine must be the same capacity as that of the engine to be started. or damage or corrosion. d clips are firmly connected. The size of the booster cabl e and clip should be suitable for the ba ttery size.
The battery of the normal m achine must be the same capacity as th at of the engine to be starte Check the cables and clips f Make sure that the cables an Check that the work equipm ent lock levers and parking brake lever s of both machines are in th e LOCK position Check that each lever is in t he NEUTRAL position. CONNECTING THE BOOSTE R CABLES f the normal machine and probl n. Keep the starting switch o machine in the OFF positio Connect the booster cable a s follows, in the order of the numb marked in the diagram. 1. Connect one clip of b terminal of the problem 2. Connect the other clip o terminal of the normal m 3. Connect one clip of b terminal of the normal m 4.
Connect the other clip o of the problem machine ooster cable (A) to the positive machine. f booster cable (A) to the positive achine. ooster cable (B) to the negative achine. 4. Connect the other clip o f booster cable (B) to the engine bl .