. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING METHODS OF LOWERING WORK EQUIPMENTS AFTER THE ENGINE STOPS (RELEASE OF THE HYDRAULIC CIRCUIT PRESSURE FOR WORK EQUIPMENTS) WARNING WHEN LOWERING THE BLADE 1. Slowly pressure releasing plug (1) control valve. Width across flats of plug: 10 mm (0.4 in) to to 18.1 lbft) 3 - 184 During operations of t he resta rt mode, a flashing display appears on the shift indicator d isplay o f the machine monitor Check that t he surrounding area is safe , the n low er the work equipment. Remove th e cover using a ste loosen the in the 2. Lower t he blade t o the gr ound. 3. Tighten the pressure releasing plug (1). Tightening torque :
19.6 to 24.5 2.5 kgm, 14.5