Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE Komatsu distributor for inspection and CLEAN AIR CONDITIONER AIR FILTER 1. Remove the cover (1) at the bottom of the operator's compartment. compressed air. If there is oil on the filter, or if the filter is neutral agent.

After rinsing it in water, dry it 4 - 27 CHECK INCHING PEDAL If a ny of t adjustmen I f the m achine does not s top even the inching pedal is d epressed I f the m achine does not m ove or lacks power e ven the i nching pedal is If th e recirculation air filter at the suction port of the air conditioner un it or the fresh air filter at the external air s uction por t becom e clogged, the h eating or cooling perf ormance will drop, so c Pull ou t recirculation air filter (2) and clean it w ith a wea k jet of Remo ve cover (3) at the rear of the cab. ). Remo ve fresh air filter (4 Use a weak jet of compr essed air to remove t he dust s tuck to the fre sh air filter (4).

REMARK Th e fresh air filter must face to a certain direction . Install it so that the thicker side faces indoor s as shown in the rig ht figure. ly dirty, w ash it in thoroughly before using it ag Replace th e filter with a new part every year. If t he cloggin g of the f ilter cannot be remo ved by blowing with air or washing in water, replace th