MAN — Removing and installing water pump

Removing and installing water pump D Take off V-belt, see page 129 D Drain coolant, see page 39 D Detach expansion tank, see page 47 D Take out thermostats, see page 41 Note: If the water pump is to be disassembled at a later date, remove V-belt pulley before the disassembly and pull off water pump hub with a stable three-arm puller. Fig. 1 1 Remove the mounting bolts from the cooling-water elbow (13 mm). Fig. 2 Remove mounting bolts from water pump (13 mm) and take off water pump. 2 Fig. 3 Clean the sealing faces on water pump and engine housing using a scraper and fine abrasive paper. Stick the new seal for the water-pump housing to the crankcase using grease. Fit water pump.

Use new seals for the cooling-water elbow. 3 42