MAN Nutzfahrzeuge Aktiengesellschaft — Removing and refitting alternator

Removing and refitting alternator Removing alternator D Relax V-belt and take it off the alternator pulley, see page 131 D Disconnect earth cable from battery 1 Disconnect terminals B+, B− (55 A alternator only), D+ and W from alternator. 2 1 Alternators (55 A and 140 A) − at bot- tom left (D 2842 LE 602) 2 Fig. 1 1 Remove mounting bolt А from bracket Remove mounting bolt Б from bracket and take off the alternators, one after the other 1 1 1 1 Alternator − at bottom left 1 Fig. 2 Remove lock nut А . Remove mounting bolt Б from bracket and take off alternator.

1 2 Attaching alternator 2 The alternator is attached in reverse sequence to the removal procedure; ensure that the cable ter- minals do not get mixed up. Check and if necessary correct alignment of the V-belt pulleys with each other. Tighten the mounting bolts to the specified torque. Tension the V-belt. After attaching the alternator check to see whether it functions faultlessly. 129