MAN Nutzfahrzeuge Aktiengesellschaft — Flame-starter sheathed-element glow plug, removing and installing

Flame-starter sheathed-element glow plug, removing and installing Removing sheathed-element glow plug Fig. 1 Disconnect the electric connections from the sheathed-element glow plug. Remove fuel line carefully. Loosen counter nut on sheathed-element glow plug and remove glow plug. Installing sheathed-element glow plug Fig. 2 1 Turn counter nut on sheathed-element glow plug upwards until it stops and apply “Curil T” sealant to threaded portion. Screw in sheathed-element glow plug with new sealing ring until it stops at the counter nut and align it with fuel line. Connect up fuel line and electric connection. Tighten counter nut.

Checking solenoid valve for leaks Remove fuel line from flame glow plug. When the engine is running and hot, no fuel must emerge. 2 Removing solenoid valve Fig. 3 D Remove fuel lines D Remove electric connection from valve D Remove the two hex bolts and take off valve The valve cannot be repaired. Exchange the defective valves. 3 Fitting solenoid valve D Screw valve to holder D Screw on electric connection D Fit the fuel lines with new sealing rings 4 45