Draining and filling with coolant Draining coolan t Danger: Draining hot coolant involves a risk of scalding. 1 Drain coolant as follows when cooling system has cooled down: Caution: Drain coolant into a suitable container and dispose of it in accordance with regu- lations. 1 Figs. 1 and 2 Briefly open cap on filler neck of expansion tank for pressure compensation. Observe the vehicle manufacturer’s instructions. 2 Open drain plug in crankcase А or in the oil cooler housing Б . Catch emerging coolant in a suitable container.
2 Fill / bleed the cooling system (only when engine has cooled down) Fill the cooling system of the engine with a mixture of drinkable tap water and anti-freeze agent on the ethy- lene glycole basis or anti-corrision agent. See Publication “Fuels, Lubricants and Coolants for MAN Diesel Engines”. Coolant must be poured in according to the vehicle manufacturer’s filling specifications. Do not pour any cold coolant into an engine which is still warm. Ensure that the ratio of water to anti-freeze is correct. D Pour in coolant slowly until the correct coolant level is reached (max. 10 ltr./min.) D Run the engine briefly and then check coolant level once more Danger:
If, in exceptional cases, the coolant level on warm engines has to be checked or the cooling cir- cuit opened, observe the vehicle manufacturer’s safety regulations. 46