Repairing coolant pump Fig. 5 Pull impeller off the pump bearing. For this purpose four threaded bores M8 are pro- vided. 5 Fig. 6 Align coolant pump housing on a suitable and stable surface. Use a suitable mandrel to press the coolant pump shaft together with bearing out of the housing. Shaft and bearing are encapsulated and ex- changed together only. Take off axial face seal. Assembling coolant pump 6 Fig. 7 Press in coolant pump bearing. Use a hollow mandrel to apply pressure to the bearing outer ring but not to the bearing shaft. Refit circlip. 7 Fig. 8 Press V-belt pulley flush on to bearing shaft. 8 51