MAN Nutzfahrzeuge Aktiengesellschaft — Repairing coolant pump with high-temperature and low-temperature parts

Repairing coolant pump with high-temperature and low-temperature parts Fig. 16 Note: For subsequent steps brace the bearing shaft. Press grooved ball bearing 6003 into position using special die (80.99604−0254). 16 Fig. 17 Press axial-face seal (no. 6) into pump housing (no. 1) using pressing tool (80.99617−0191). Observe installation note for seal on page 60. 17 Fig. 18 Slowly press impeller on to bearing shaft to ensure correct gap. 18 Fig. 19 For this purpose an inspection hole closed up with a screw plug (M16x1.5) is provided on the bottom of the water pump housing. 2 1 1 Impeller 2 Water pump housing 19 58