Removing and installing intake manifold Note: When carrying out work on the intake system, ensure meticulous cleanliness to prevent dirt and foreign matter from penetrating into the system. Removing intake manifold Fig. 1 Remove intake manifold (D 2842 LE 602 / 604 at front, D 2842 LE 607 at rear). 1 Remove the injection lines, see page 37. Fig. 2 Remove the mounting bolts from the charge-air pipe. 2 Fig. 3 Remove the mounting bolts from the intake pipe. Take off intake pipe. Installing intake manifold 3 Fig. 4 Place intake manifold with new seals in position. Fit the mounting bolts. Ensure that the seals are correctly seated. Tighten mounting bolts to the specified torque.
Attach the injection lines. Fit the charge-air elbow and the charge-air pipes leading to the turbocharger. Exchange O-ring seals. 4 80