MAN Nutzfahrzeuge Aktiengesellschaft — Removing and installing exhaust manifold

Removing and installing exhaust manifold Removing exhaust manifold D Remove turbocharger, see page 87 Fig. 1 Remove the guard plates. Fig. 2 Note: The exhaust-gas pipe can be removed with the exhaust manifold attached. 1 Remove the mounting bolts from the exhaust pipe. Danger: The exhaust pipe is heavy. Before removing all mounting bolts, it is advisable to replace two bolts with self-made threaded guide pins. Take off the exhaust pipe. D 2842 LE 602 Take off exhaust-gas pipe and heat shield 2 Installing exhaust manifold Fig. 3 Before fitting the exhaust pipe, screw in two guide pins. Fit exhaust pipe with new seals.

D 2842 LE 602 Fit exhaust-gas pipe with heat shield and new seals (Observe correct sequence). Ensure that the seals are correctly seated. 3 Fig. 4 Tighten mounting bolts 51.90490−0054 M10x103−HWF, spacer bush 51.91701−0942 and heat shield. Initial torque: 60−65 Nm Rotation angle: 90 ° Retighten by 90 ° after 100 h. D Installing turbocharger 4 81