Doosan — Doosan D60S-5 and G60S-5 Lift Truck Operation Manual

Operation Section Parking the Lift Truck Blocking the wheels will prevent unexpected lift truck movement, which could cause personal injury. 5. Turn the ignition key switch to the OFF position and remove the key. Park the lift truck level, with the forks lowered and the mast tilted forward until the fork tips touch the floor. Block the drive wheels when parking on an incline. 1. Park in authorized area only. Do not block traffic. Typical Example NOTE: If a LP equipped lift truck is stopped or parked for an indefinite or prolonged period of time, close the fuel shutoff valve on the LP tank. Run the engine until fuel in the line runs out and the engine stops.

Turn off the ignition switch and disconnect switch (if equipped). 6. Actuate each loading lever several times to remove the residual pressure in the respective cylinders and hoses. 7. Block the drive wheels if parking on an incline. 2. Place the transmission controls in NEUTRAL. 3. Engage the parking brake. Typical Example Typical Example 4. Lower the forks to the ground. 116 WARNING