Doosan — Doosan D60S-5 and G60S-5 Lift Truck Operation Manual

Operation Section Lift Fork Adjustment When adjusting the fork spread, be careful not to pinch your hand between forks and the carriage slot. Make sure the forks are locked before carrying a load. For load stability, always adjust the forks as wide as possible. Position the load evenly on both forks. Typical Example of Shaft type Fork Typical Example of Hook-on type Fork 1. Move up the hook pin(1) in each fork to slide the fork(2) on the carriage bar. 2. Adjust the forks in the position most appropriate for the load and as wide as possible for load stability. 3. When adjusting the forks, make sure that the weight of the load is centered on the truck. 4.

After adjustment, set the hook pins to keep the forks in place. 117 WARNING WARNING