Doosan — Doosan D60S-5 and G60S-5 Lift Truck Operation Manual

Maintenance Section Horn and Lights(If Equipped) – Check Steer Susension – Inspect 1. Inspect the suspension mounting bolts. Tighten suspension each four mounting bolts(total eight bolts), if necessary, to 240 ± 40N m(177 ± 29 lb ft) . 2. Look for leaks at the power steering hose and tube connections . 3. Remove any trash buildup on the suspension or steer axle. Universal Joint - Inspect, Lubricate 1. Press horn button, to determine if horn is operational. 2. Check and replace all defective gauges. 3. Check all lights such as warning, directional, backup, driving and flood lights for correct operation. Replace all burned out bulbs. Have repairs made if needed.

Overhead Guard – Inspect Typical Example Typical Example Check for worn or damaged bearings. Check for loose retaining bolts and nuts. Tighten the bolts and nuts, if necessary.(55N m, 41 lb ft) Lubricate one fitting on the universal joint. Typical Example 1. Check tightness of overhead guard mounting bolts at 240 N m (175 lb ft). 2. Check overhead guard for bent or cracked sections. Have repairs made if needed. 170