42 GETTING TO KNOW YOUR INSTRUMENT PANEL The system allows the driver to select information by pushing the following buttons mounted on the instrument panel to the right of the steering column: Dimmer: C HANGE E NGINE O IL — I F E QUIPPED With headlights on and without entering in the menu, push the up or down arrow button to increase or decrease the brightness of the instrument panel, graphics and command buttons. Your vehicle may be equipped with an engine oil change indicator system. The “Change Engine Oil” message will display in the instrument cluster display.
The engine oil change indicator system is duty cycle based, which means the engine oil change interval may fluctuate, dependent upon your personal driving style. Selecting An Option Of The Main Menu With Submenu: 1. Briefly push and release the MENU button to display the first submenu option. 2. Push and release the up or down arrow button (by single pushes) to scroll through all the submenu options. Unless reset, this message will continue to display each time you turn the ignition switch to the ON/ RUN position. To turn off the message temporarily, push and release the MENU button.
To reset the oil change indicator system (after performing the scheduled maintenance), refer to the following procedure. Instrument Cluster Display Control Buttons 3. Briefly push and release the MENU button to select the displayed submenu option and to open the relevant setup menu. MENU Button Push and release the MENU button for a time longer than one second to access/select the information screens or submenu screens of a main menu item. Push and hold the MENU button for two seconds to reset displayed/ selected features that can be reset. 1. Turn the ignition switch to the ON position (do not start the engine). 4.
Push and release the up or down arrow button (by single pushes) to select the new setting for this submenu option. 2. Fully push the accelerator pedal slowly, three times, within 10 seconds. 5. Briefly push and release the MENU button to store the new setting and go back to the previously selected submenu option. 3. Turn the ignition switch to the OFF position. Up And Down Arrow Buttons: NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary, repeat this procedure. Using the up or down arrow button allows you to cycle through the Main Menu Items. 6.
Push and hold the MENU button to return to the main menu (short hold) or the main screen (longer hold). NOTE: If equipped with a Uconnect system, some of the menu items will be present in the radio head unit Ъ page 78.