RAM ProMaster City — Trip Button

44 GETTING TO KNOW YOUR INSTRUMENT PANEL Exit Menu T RIP B UTTON New Trip This is the last function that closes the cycle of settings listed in the menu screen. The TRIP button, located on the right steering column stalk, can be used to display and to reset the previously described values. Push and hold the TRIP button to reset the system manually. To reset: 1. Pushing the MENU button briefly will return the display to the standard screen without storing. When the “Trip distance” reaches 99999.9 miles or kilometers or when the “Travel time” reaches 999.59 (999 hours and 59 minutes), the system is reset automatically. 2.

Push the down arrow button to return to the first menu item on the display. TRIP COMPUTER Disconnecting/Reconnecting the battery resets the system. The Trip Computer is located in the instrument cluster. It features a driver interactive display (displays information such as trip information, range, fuel consumption, average speed, and travel time). NOTE: If the reset operation occurs in the presence of the screens concerning Trip A or Trip B, only the infor- mation associated with Trip A or Trip B functions will be reset. Start Of Trip Procedure NOTE: The Uconnect System also has a Trip Computer display and menus to customize the information displayed in the cluster Ъ page 78.

Trip Button Location A short button push displays the different values. With the ignition on, push and hold the TRIP button for over two seconds to reset trip information. A long button push resets the system and then starts a new trip. Exit Trip 1. To exit the Trip function, wait until all the values have been displayed or hold the MENU button for longer than one second. 2. Briefly push and release the MENU button to go back to the menu screen or push and hold the MENU button (approximately one second) to go back to the main screen without storing settings.