STRUCTURE AND FUNCTION CLSS 5) Shuttle valve inside pressure compensation valve (work equipment, swing valve) Function When holding pressure A in the actuator circuit is higher than LS pressure P LS , holding pressure A is taken from shuttle valve (4) to the spring chamber to prevent piston (3) and valve (5) from separating. # When there is no shuttle valve If there is no shuttle valve installed, piston (3) is pushed back to the left in the direction of the arrow by holding pressure A . In this condition, if another actuator is operated, pis- ton (3) acts as an accumulator, so there is a time lag, and piston (3) cannot follow the rise in LS pres- sure P LS . 10-79