STRUCTURE AND FUNCTION CLSS 2. When lowering the boom, if head pressure B of cylinder (1) is greater than bottom pressure A , and the work equipment is in the digging process, check valve (3) closes and shuts off the circuit between the head and bottom ends. Operation When the boom is lowered, if the work equip- ment is in the digging process, pressure B at the head end of cylinder (1) becomes higher than pressure A at the bottom end. When this happens check valve (3) is closed by the spring and pressure B at the head end, so the circuit between the head circuit and bot- tom circuit is shut of. 1. Boom cylinder 2. Boom spool 3. Check valve Pp : Pump circuit (pressure) A :
Bottom circuit (pressure) B : Head circuit (pressure) T : Tank circuit (pressure) 10-83