Komatsu — CLSS

STRUCTURE AND FUNCTION CLSS 7) Boom regeneration circuit Function 1. When the boom is being lowered, if bottom pressure A of cylinder (1) is higher then head pressure B , and there is hydraulic drift, this sends the return oil flow at the bottom end to the head end to increase the cylinder speed by that amount. Operation When there is hydraulic drift when lowering the boom, pressure A at the bottom end of boom cylinder (1) becomes higher than pressure B at the head end. When this happens, part of the return oil at the bottom end passes through regeneration pas- sage a of boom spool (1), pushes check valve (3) open, and flows to the head end.

As a result, the boom lowering speed is in- creased. 1. Boom cylinder 2. Boom spool 3. Check valve Pp : Pump circuit (pressure) A : Bottom circuit (pressure) B : Head circuit (pressure) T : Tank circuit (pressure) 10-82