Komatsu — OPERATION OF TRAVEL MOTORS ( 30 Km/ h TRAVEL SPEED SPEC.)

STRUCTURE AND FUNCTION TRAVEL MOTORS OPERATION OF TRAVEL MOTORS (30 Km/h TRAVEL SPEED SPEC.) 1) During normal travel 2 1. Front motor 2. Rear motor 3. Transmission and clutch 4. Drive shafts 5. Main control valve 6. Main pump 7. Swivel joint When the machine accelerates from stationary the pressure at the travel motors rises to maximum. This high pressure is used to set the displacement of front and rear travel motor to maximum to give maximum torque. As the machine speed increases, the flow to the travel motors increases and so pressure will reduce. This reducing pressure is used to reduce the displacement of the travel motors to allow increasing speed.

At first the rear motor changes from maximum displacement to zero and is then disconnected by the clutch and then the front motor changes from maximum to a preset minimum. Displacement changes according to the diagram below. 2 10-108