STRUCTURE AND FUNCTION TRAVEL MOTORS 2) Control of speed downhill At high speed, only the front motor is working. When the machine is travelling downhill, machine speed must be limited to prevent overspeed of travel motor, transmission and axles. In the downhill condition the machine weight is driving the machine and pressure at the travel motor inlet becomes low. This low pres- sure is used to close the counterbalance valve. The travel motor will rotate because it is driven from the wheels and so oil in the travel motor is circulated at high pressure through the brake valves. This oil circu- lated at high pressure in the travel motor does work to slow the machine. 1. Counterbalance valve 2.
Brake valve 3. Swivel joint 4. Main control valve 5. Front travel motor 10-109