STRUCTURE AND FUNCTION ENGINE CONTROL SYSTEM ENGINE CONTROL SYSTEM 1. Starting switch 2. Fuel control dial 3. Pump and engine throttle controller 4. Governor motor 5. Loose spring 6. Battery relay 7. Battery 8. Fuel injection pump FUNCTION The engine can be started and stopped simply by using the starting switch. A dial type engine control is used to control the engine speed. The engine throttle controller re- ceives the control signal from the fuel control dial, sends a drive signal to the governor motor, and controls the angle of the governor lever in the fuel injection pump.
At the same time, the engine throttle controller also receives signals from other controllers to control the engine speed. 10-131