Komatsu — ENGINE CONTROL SYSTEM

STRUCTURE AND FUNCTION ELECTRONIC CONTROL SYSTEM 2) Pump control function when traveling If the travel is operated in any working mode other than the heavy-duty operation (H/O) mode, the working mode and engine speed are kept as they are, and the pump absorption torque is increased to the maximum horse- power at that speed. 3) Control function when PC prolix switch is ON Even if any abnormality should occur in the controller or sensor, the PC prolix switch can be turned ON to provide an absorption torque more or less equivalent to the general operation (G/O) mode, thereby allowing the machine to maintain its functions.

In this case, it is designed to allow a constant current to flow from the battery to the PC valve, so oil pressure sensing is carried out only by the PC valve. 10-142