Komatsu — ENGINE CONTROL SYSTEM

STRUCTURE AND FUNCTION ELECTRONIC CONTROL SYSTEM # Quick warming up for hydraulic oil when swing lock switch is ON: When the swing lock switch is turned ON, the cut- off function is cancelled. If the work equipment is relieved in this condition, the temperature of the hydraulic oil can be raised more quickly to reduce the warming up time. 4) 2-stage relief function The relief pressure for normal operations is 31.85 MPa (325 kg/cm2), but when the 2-stage relief function is actuated, the relief pressure rises to approx. 34.79 MPa (355 kg/cm2). Because of this, the hydraulic pressure is in- creased by one stage.

When the 2-stage relief function is actuated, the cut-off cancel function is also actuated automati- cally. Actuating conditions for 2-stage relief function 5) Fine control mode function When the finishing operation (F/O) mode is se- lected from the working mode, the pump LS valve is controlled, and the pump discharge amount is reduced to improve the ease of fine control and the precision when finishing. Relationship between working mode and pump discharge amount (for independent operation) (%) 10-145 Conditions Relief pressure • When travelling • When swing lock switch is ON • In lifting operation (L/O) mode • When power max.

function or swift slow-down function are actuated 31.9 MPa (325 kg/cm2) 34.8 MPa (355 kg/cm2) Actuator Boom Arm Bucket Swing Mode RAISE LOWER IN OUT Heavy-duty operation (H/O) 100 50 100 100 50 50 General operation (G/O) Finishing operation (F/O) 80 50 60 80 40 40 Lifting operation mode(L/O) 100 50 100 100 50 50 Breaker operation (B/O)