STRUCTURE AND FUNCTION ELECTRONIC CONTROL SYSTEM FUNCTION If the coolant temperature is low, this automati- cally raises the engine speed to warm up the engine after it is started. (Automatic warming- up function) In addition, if the coolant temperature rises too high during operations, it reduces the load of the pump to prevent overheating. (Engine over- heat prevention function) 1) Engine automatic warming-up function After the engine is started, if the engine coolant temperature is low, the engine speed is automatically raised to warm up the engine. Conditions for actuation (both are necessary) Actuation Coolant temperature: Less than 30 ° C Engine speed: Less than 1400 rpm Engine speed:
1250 rpm or below Cancellation Engine speed: As desired 10-151 Conditions for cancellation (any one) Automatic Coolant temperature: 30°C or above Automatic warming-up time: 10 minutes or more Manual Fuel control dial: Held at more than 70% of full speed for more than 3 seconds