Komatsu — DISPLAY METHOD AND SPECIAL FUNCTIONS OF MONITOR PANEL

DISPLAY METHOD AND SPECIAL FUNCTIONS OF MONITOR PANEL TROUBLESHOOTING TESTING AND ADJUSTING DISPLAY METHOD AND SPECIAL FUNCTIONS OF MONITOR PANEL 1. Display on machine monitor When the starting switch is turned on, all the monitor and gauge lamps light up for approx. 3 seconds, and the buzzer sounds for approx. 1 second. During this time, the monitor itself carries out self diagnosis, and after it has finished, it returns to the normal display. 2. Recording of service codes and user code display function 1) All the abnormality data for the engine throttle and pump controller is sent to the monitor panel.

When the monitor panel receives this data, it records the abnormality data, and at the same time, depending on the nature of the abnormality, it displays the user code on the time display panel to advise the operator of the action to take. However, in cases of abnormalities which are not urgent and do not require the user code to be dis- played, the content of the abnormality is simply recorded, and no display is given.

2) Types of user code and system E-02 (PC-EPC system) E-03 (Swing holding brake system) E-05 (Governor motor system) # For details of the service codes included in the user code, see the action taken by the controller when an abnormality occurs, the symptoms on the machine or the judgement table. 3) Displaying user code If it becomes necessary to display the user code, the time display panel is automatically switched to advise the operator to take the necessary action. Actual display (Example: Disconnection in the cancel solenoid system for the swing holding brake) 20-83