Komatsu — METHOD OF USING JUDGEMENT TABLE

TROUBLESHOOTING TESTING AND ADJUSTING METHOD OF USING JUDGEMENT TABLE METHOD OF USING JUDGEMENT TABLE This judgement table is a tool to determine if the problem with the machine is caused by an abnormality in the electrical system or by an abnormality in the hydraulic or mechanical system. The symptoms are then used to decide which troubleshooting table (E- , S- , C- , F- , H- , M- ) matches the symptoms. The judgement table is designed so that it is easy to determine from the user code and service code which troubleshooting table to go to. # The abnormality display (warning) given by the monitor panel leads directly to troubleshooting of the ma- chine monitor (M- ).

(See troubleshooting of the machine monitor system.) 1. When using judgement table for engine throttle - pump controller (governor control system) and engine related parts If a service code is displayed on the monitor panel, go to the troubleshooting code at the bottom of the judgement table (E- ). (A mark is put at the places where the failure mode and service code match.) If a problem has appeared but no service code is displayed on the monitor panel, go to the point where the failure mode matches the troubleshooting code on the right of the judgement table (E- or S- ). Failure mode "Engine does not start". Procedure: Check if the service code is being displayed on the monitor panel.

JUDGEMENT TABLE FOR ENGINE THROTTLE, PUMP CONTROLLER (GOVERNOR CONTROL SYSTEM), AND ENGINE RELATED PARTS [Judgement] 1) If a service code is being displayed on the monitor panel ..... go to troubleshooting [E3: ] for the engine throttle - pump controller (governor control system). 2) If no service code is displayed on the monitor panel, and the engine does not start: Starting motor rotates ......................... Go to troubleshooting S-2 of mechanical system Check that starting motor rotates Starting motor does not rotate ............ Go to troubleshooting E-8 of electrical system 20-93