TESTING AND ADJUSTING ACTION TAKEN BY CONTROLLER WHEN ABNORMALITY OCCURS AND PROBLEMS ON MACHINE Condition when normal (voltage, current, resistance) Action by controller when abnormality is detected Problem that appears on machine when there is abnormality 1. Takes pump pressure as 0 MPa {0 kg/cm 2 )} when actuating. 2 If the abnormality is detected, it switches the output OFF, and when all levers are returned to neutral, it outputs again. # This automatic resetting is repeated up to 3 times. 1. The travel speed does not auto- matically shift (it does not change from Hi to Lo) # If the button is operated manually, the panel display is switched. Between C03 (6) and (16):
18 - 28 V Resistance: 500 - 1000 Ω Voltage (AC range) : 0.5 - 3.0 V (engine started) 1. It functions as the equivalent of the G/O mode (the speed rises) 1. It operates about the same as G/O mode (prolix) (the power is slightly lower) 20-169