TESTING AND ADJUSTING H-10, H-11 H-10 Work equipment (boom, arm, bucket) does not move (but travel and swing are normal) H-11 Excessive hydraulic drift (boom, arm, bucket) 20-221 # When boom, arm, and bucket are each operated independently. 1 YES Is output pressure of PPC valve normal? • 3.6±0.3 MPa NO (36.7±3 kg/cm2) • Engine at high idling. Cause Remedy Defective control valve spool Defective PPC valve Correct or replace Replace YES 1 Does speed of downward movement become faster when YES lever is operated? 2 • See TESTING AND Does condition ADJUSTING. become normal when • It is also possible to NO safety suction valve 3 YES measure leakage of is interchanged?
Go to A Is slipper seal of pressure cylinder. compensation valve free • Max. 15 cc/min. of damage? Or does • At relief NO pressure compensation • Engine at high idling. piston move smoothly? • It is also possible to NO interchange with other compensation valve. Note: After inspection, do not forget to return to the original position.
(Arm, bucket) From A (Boom) Cause Remedy Defective hydraulic cylinder piston packing Defective operation of safety-suction valve Damaged slipper seal of pressure compensation valve, or defective operation of pressure compensation piston Defective oil tightness of control valve spool Defective operation of boom lock valve Replace Replace Correct or replace Replace Correct or replace