Komatsu — H- 13 Other equipment moves when single circuit is relieved.

TESTING AND ADJUSTING H-12, H-13 H-12 Excessive time lag (engine at low idling) Output pressure of LS-EPC solenoid. Approx. 2.5 MPa (26 kg/cm 2 ) is output from the LS-EPC solenoid when the engine is at low idling (approx. 1000 rpm or below), regardless of the working mode. H-13 Other equipment moves when single circuit is relieved. The slipper seal in the pressure compensation valve of the circuit that moved is defective. 20-222 (Boom) YES 2 Is pressure (Arm, bucket) compensation valve YES normal, or does pressure compensation 1 piston move smoothly? Is output pressure of • It is also possible to LS-EPC solenoid interchange with other NO valve normal? compensation valve.

• After inspection, do not forget to return to the See below. original position. NO Cause Remedy Defective safety-suction valve, or defective boom regeneration valve Defective safety-suction valve Defective operation of pressure compensation valve or pressure compen- sation piston Defective operation of LS- EPC solenoid valve. Replace Replace Correct or replace Correct or replace Cause Remedy Defective operation of pressure compensation valve slipper seal. Replace