TESTING AND ADJUSTING H-17 H-17 Travel speed is slow # When travel speed is normal. # Check operating condition of pressure switch with monitoring code before carrying out troubleshooting. # Carry out troubleshooting in the heavy-duty operation mode. NO 2 2 2 Is propshaft speed (wheels up) normal? NO NO Is LS differential pressure normal? Adjust according to section 20-31 YES YES NO 2 2 3 YES Is PPC pressure at main travel valve normal? YES Is transmission clutch actuation pressure normal? YES 2 YES Is output pressure of LS-EPC solenoid valve normal? Min. 2.7 MPa (min. 26.5 kg/cm 2 ) See table 2 Is travel pressure switch normal?
See table 1 NO Engine at high idling Travel pedal full (wheels off ground) Hi mode * If auto-deceleration is cancelled when travel is operated, system is normal. (When travel PPC shuttle (built into travel PPC valve) is normal) NO Table 1. Output pressure of LS-EPC solenoid Table 2. Transmission clutch pressure Table 3 Output pressure of travel EPC * See testing and adjusting - Testing propshaft speed.
20-224 Lo Mid Hi 2.0±0.2MPa {20±2kg/cm2} 0.59±0.2MPa {6 ±2kg/cm2} 0.2±0.2MPa {2 ±2kg/cm2} •Engineathighidling •Travelpedalatfinecontrolposition •(autodecelerationcancelled) Lo Mid Hi 4.7± 0.2MPa {48± 2kg/cm2} •Measureatclutchinletport •Wheelsoffground •Fulltravelspeed,noload Lo Mi Hi 1.4±0.2MPa (14±2kg/cm2) 29.4+ 0.4 MPa - 0.2 (30+ 4kg/cm2) - 2 29.4+ 0.4 MPa - 0.2 (30+ 4 kg/cm2) - 2 •Engineathighidling •Travelleveratfinecontrolposition •(autodecelerationcancelled) •MeasurePPCpressureatmainvalve •(travelspool)