Komatsu — H- 19 Does not swing

TESTING AND ADJUSTING H-19 H-19 Does not swing (When swing PPC shuttle and valve controller are normal.) b) Does not swing in one direction 20-227 3 YES Is any dirt found in YES swing machinery 2 drain? Is output pressure of YES holding brake NO release solenoid 1 valve normal? Is swing pressure • 3.3± - - 00 .3 MPa switch normal? (36.7± - - 3 0 kg/cm2) NO • Operate swing lever. • Turn swing lock • See Judgement switch ON (lock) Table Note: NO If auto- deceleration is cancelled when swing is operated, system is normal.

Cause Remedy Defective swing machinery Defective swing holding brake or swing motor Defective operation of holding brake release solenoid valve Defective swing pressure switch. Repair or replace Repair or replace Correct or replace Replace 2 YES Does control valve YES spool move 1 smoothly? Is PPC valve output NO pressure normal? • 3.6± - - 00 . 3 MPa (36.7± - - 30 kg/cm2) NO • Operate swing lever. • Turn swing lock switch ON (lock). Cause Remedy Defective swing motor safety valve Defective operation of control valve spool Defective PPC valve Replace Correct or Replace Replace