TESTING AND ADJUSTING TROUBLESHOOTING M-7, M-8 M-7 When starting switch is turned ON, monitor panel lamps all stay lighted up and do not go out. M-8 When starting switch is turned ON, items lighted up on monitor panel are different from actual machine (model) # Immediately after replacing the monitor panel, turn the starting switch OFF, then turn it ON again. YES 1 Is display of monitoring code 01 as shown in table? Defective monitor panel. Replace Turn starting switch ON. Set to monitoring code 01. NO Go to troubleshooting for C mode (See C-14) - Table 20-248 Cause Remedy Defective monitor panel Replace Cause Remedy