Komatsu — M- 12 When starting switch is turned ON ( engine stopped), caution items, emergency items flash ( battery, engine oil pressure lamps do not light up).

TESTING AND ADJUSTING TROUBLESHOOTING M-12 b) Engine oil pressure sensor system # When engine oil pressure is normal. M-12 b) Related electric circuit diagram 20-255 3 YES YES Is bit (1) or monitoring code 24 2 lighted up? Is there continuity YES between C16 • Engine at low idling. NO (female) (15) and • Set to monitoring 1 sensor wiring code 24. harness? Is there continuity • Turn starting switch between sensor OFF NO terminal and • Disconnect C16 and chassis? sensor wiring • Turn starting switch harness. OFF • Remove sensor NO wiring harness.

Cause Remedy Defective governor, pump controller Defective monitor panel Defective contact, or disconnection in wiring harness between C16 (female) (15) - E08 (8) - sensor or P10 (A) - E 08 (11) - C03 (16) Defective oil pressure sensor. Replace Replace Repair or replace Replace