DISASSEMBLY AND ASSEMBLY METHOD OF USING MANUAL METHOD OF USING MANUAL 1. When removing or installing unit assemblies (1) When removing or installing a unit assembly, the order of work and techniques used are given for the removal operation; the order of work for the installation operation is not given. (2) Any special techniques applying only to the installation procedure are marked [*1] , and the same mark is placed after the relevant step in the removal procedure to indicate which step in the installation procedure it applies to.
(Example) REMOVAL OF ASSEMBLY ...............................Title of operation .................................................................Precautions related to safety when carrying out the operation 1. XXX (1) .................................................................Step in operation # .................................................................Technique or important point to remember when removing XXX (1) 2. (2)............................................................... Indicates that a technique is listed for use during installation 3.
assembly (3) 1 .................................................................See Lubricant and Coolant Table INSTALLATION OF ASSEMBLY .......................Title of operation Carry out installation in the reverse order to removal .................................................................Technique used during installation # .................................................................Technique or important point to remember when installing (2) Adding water, oil ..............................................Step in operation # .................................................................Point to remember when adding water or oil 1 2.
General precautions when carrying out installation or removal (disassembly or assembly) of units are given together as PRECAUTIONS WHEN CARRYING OUT OPERATION, so be sure to follow these precautions when carrying out the operation. 3. Listing of special tools (1) For details of the description, part number, and quantity of any tools ( A1 , etc.) that appear in the operation procedure, see the SPECIAL TOOL LIST given in this manual. 30-3