Komatsu — PRECAUTIONS WHEN CARRYING OUT OPERATION

DISASSEMBLY AND ASSEMBLY PRECAUTIONS WHEN CARRYING OUT OPERATION PRECAUTIONS WHEN CARRYING OUT OPERATION [When carrying out removal or installation (disassembly or assembly) of units, be sure to follow the general precautions given below when carrying out the operation.) 1. Precautions when carrying out removal work If the coolant contains antifreeze, dispose of it correctly. After disconnecting hoses or tubes, cover them or fit blind plugs to prevent dirt or dust from entering. When draining oil, prepare a container of adequate size to catch the oil.

Confirm the match marks showing the installation position, and make marks in the necessary places before removal to prevent any mistake when assembling. To prevent any excessive force from being applied to the wiring, always hold the connectors when discon- necting the connectors. Fit wires and hoses with tags to show their installation position to prevent any mistake when installing. Check the number and thickness of the shims, and keep in a safe place. When raising components, be sure to use lifting equipment of ample strength. When using forcing screws to remove any components, tighten the forcing screws alternately.

Before removing any unit , clean the surrounding area and fit a cover to prevent any dust or dirt from entering after removal. # Precautions when handling piping during disassembling Fit the following blind plugs into the piping after disconnecting it during disassembly operations.

1) Hoses and tubes using sleeve nuts 2) Split flange type hoses and tubes 3) If the part is not under hydraulic pressure, the following corks can be used 30-4 Nominal number Plug(nutend) Sleevenut(elbowend) Usethetwoitemsbelowasaset 02 07376-50210 07221-20210(Nut),07222-00210(Plug) 03 07376-50315 07221-20315(Nut),07222-00312(Plug) 04 07376-50422 07221-20422(Nut),07222-00414(Plug) 05 07376-50522 07221-20522(Nut),07222-00515(Plug) 06 07376-50628 07221-20628(Nut),07222-00616(Plug) 10 07376-51034 07221-21034(Nut),07222-01018(Plug) 12 07376-51234 07221-21234(Nut),07222-01219(Plug) Nominalnumber Flange (hoseend) Sleevehead (tubeend) Splitflange 04 07379-00400 07378-10400 07371-30400 05 07379-00500 07378-10500 07371-30500 Normal number Partnumber Dimensions D d L 06 07049-00608 6 5 8 08 07049-00811 8 6.5 11 10 07049-01012 10 8.5 12 12 07049-01215 12 10 15 14 07049-01418 14 11.5 18 16 07049-01620 16 13.5 20 18 07049-01822 18 15 22 20 07049-02025 20 17 25 22 07049-02228 22 18.5 28 24 07049-02430 24 20 30 27 07049-02734 27 22.5 34