Komatsu — INSTALLATION OF ENGINE, MAIN PUMP ASSEMBLY

DISASSEMBLY AND ASSEMBLY ENGINE, MAIN PUMP INSTALLATION OF ENGINE, MAIN PUMP ASSEMBLY Carry out installation in the reverse order to removal. 2 # Set the engine mount rubber as shown in the dia- gram, then install the engine and main pump as- sembly. Engine mounting bolt: 277.0 ± 31.9 Nm {28.25 ± 3.25 kgm} Refilling with water # Add water through the water filler to the specified level. Run the engine to circulate the water through the system. Then check the water level again. Refilling with oil (hydraulic tank) # Add oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Then check the oil level again.

Bleeding air # Bleed the air from the main pump. For details, see TESTING AND ADJUSTING, Bleeding air. 30-14