DISASSEMBLY AND ASSEMBLY FRONT AXLE SWIVEL HOUSING The pivot bearing (1) has to be assembled under the press for the race placed on the king pin and in cold conditions (as in azote bath) for the race placed on the axle. The top bush (2) must be cooled (as in azote bath) before mounting in the axle seat. Check the oil seal (4) conditions; if necessary, replace it. Lubricate it by using a right seal driver to avoid dam- aging it during the assembly. Check the O-ring (5) conditions; if necessary, replace it. Carry out the swivel pin bearing clearance record. 30-46