DISASSEMBLY AND ASSEMBLY FRONT AXLE BEVEL GEAR AND PINION SET Unscrew the screw (1) and the bolts (10) to disassem- ble the complete differential and to be able to work on bench. Check the oil seal (8) conditions, best re- place it. When reassembling, fill with grease the oil seal. Check the conditions of the bevel pinion bearings (2) and of the differential bearings (3); replace them, if necessary. The operations to carry out on this group are the following ones:
PINION POSITIONING PINION BEARINGS PRE-LOAD PINION-CROWN TEETH BACKLASH DIFFERENTIAL BEARINGS PRE-LOAD ADJUSTMENT PLANGE ON PINION If you change the bevel gear and the pinion set, you have to replace the ring nut (4), the washers (5) and (6) and the collapsible spacer (7). 30-50