Komatsu — INSTALLATION OF HYDRAULIC TANK ASSEMBLY

DISASSEMBLY AND ASSEMBLY HYDRAULIC TANK 10. Disconnect hydraulic tank inlet hose (16). 11. Remove pump suction tube (18). 12. Remove mounting bolts, and lift off hydraulic tank as- sembly (19). 1 Hydraulic tank assembly: 115 kg. INSTALLATION OF HYDRAULIC TANK ASSEMBLY Carry out installation in the reverse order to removal. 1 Thread of hydraulic tank mounting bolt: Thread tightener (LT-2) Hydraulic tank mounting bolt: 276.9 ± 31.9 Nm (28.25 ± 3.25 kgm) Refilling with oil (hydraulic tank) # Add oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Then check the oil level again. Bleeding air # Bleed the air.

For details, see TESTING AND ADJUSTING, Bleeding air. 30-75