DISASSEMBLY AND ASSEMBLY MAIN PUMP REMOVAL OF MAIN PUMP ASSEMBLY Disconnect the cable from the negative (-) terminal of the battery. Lower the work equipment completely to the ground and stop the engine. Then loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Remove the hydraulic tank strainer and, using tool B , stop the oil. When not using tool B , remove the drain plug, and drain the oil from the hydraulic tank and inside the sys- tem. Hydraulic tank: Approx. 100 l . 1. Drain oil from PTO gear case. PTO gear case: Approx. 0.75 l . 2. Open engine hood, and remove main pump top cover, then remove exhaust muffler cover (1) and insulator (2). 3.
Disconnect connecting pipe portion at turbocharger end, and remove exhaust muffler (3) together with bracket. 4. Disconnect wiring connectors (4), remove bracket (5) tightened together with tube. 5. Disconnect main pump suction tube (7). 8. Disconnect main pump outlet hose (10). 9. Disconnect main pump drain hose (11). 10. Disconnect LS pressure input hose (12). 11. Disconnect hose (13). 12. Disconnect EPC valve basic pressure hose. 30-76