Komatsu — INSTALLATION OF MAIN PUMP INPUT SHAFT OIL SEAL

DISASSEMBLY AND ASSEMBLY MAIN PUMP INPUT SHAFT OIL SEAL REMOVAL OF MAIN PUMP INPUT SHAFT OIL SEAL 1. Remove main pump assembly. For details, see REMOVAL OF MAIN PUMP ASSEM- BLY. 1 2. Remove bearing case assembly (1). 3. Remove snap ring (2), then remove spacer (3). 4. Lever up oil seal (4) with a screwdriver to remove. # When removing the oil seal, be extremely careful not to damage the shaft. 2 INSTALLATION OF MAIN PUMP INPUT SHAFT OIL SEAL Carry out installation in the reverse order to removal. 1 Bearing cage mounting bolt: 110.3 ± 12.3 Nm (11.25 ± 1.25 kgm) 2 Lip of oil seal: Grease (G2-LI) Coat the outside circumference of the oil seal with grease (G2-LI) thinly, then press fit.

# Using tool G, press fit oil seal (4). 30-78