Komatsu — ASSEMBLY OF LS SELECT VALVE

DISASSEMBLY AND ASSEMBLY LS SELECT VALVE DISASSEMBLY OF LS SELECT VALVE 1. Remove sleeve (2) and spring (3) from sleeve (1). 2. Remove O-rings (4) and (5), and seal (6) from sleeve (1). 3. Remove plug (7), then remove pistons (8) and (9), and spring (10). 4. Remove O-ring (11) from plug (7), then remove seal (12) and O-ring (13) from piston (9). # After disassembling, if there is any abnormality in any part except O-rings (4), (5), (11), or seal (6), replace the whole LS select valve assembly. ASSEMBLY OF LS SELECT VALVE Before assembling coat the sliding surface with en- gine oil. 1.

Install O-ring (13) and seal (12) to piston (9), then as- semble piston (8) and spring (10), and install in sleeve (1). 2. Assemble O-ring (11) to plug (7) and install to sleeve (1). Plug: 68.6 ± 9.9 Nm (7 ± 1 kgm). 3. Assemble spring (3) to sleeve (2), and install to sleeve (1). 4. Install O-rings (4) and (5), and seal (6) to sleeve (1). 30-85