Komatsu — IDENTIFICATION OF LS SHUTTLE VALVE

DISASSEMBLY AND ASSEMBLY LS SHUTTLE VALVE DISASSEMBLY OF LS SHUTTLE VALVE 1. Remove seat (2) from plug (1), then remove O-ring (3) and ring (4). 2. Remove ball (5) from plug (1), then remove O-rings (6) and (7), and ring (8). # After disassembling, if there is any abnormality in plug (1), seat (2), or ball (5), replace the whole LS shuttle valve assembly. ASSEMBLY OF LS SHUTTLE VALVE Before assembling coat the sliding surface with en- gine oil. 1. Install ring (8) and O-rings (7) and (6) to plug (1). 2. Fit ring (4) and O-ring (3) to seat (2), then assemble ball (5) to plug (1), and install seat (2).

IDENTIFICATION OF LS SHUTTLE VALVE Shuttle valves are identified by markings on the valve assembly. Type A - 1 mark Type B - 3 marks 30-86