Komatsu — INSTALLATION OF TRAVEL PPC PEDAL ASSEMBLY

DISASSEMBLY AND ASSEMBLY TRAVEL PPC PEDAL REMOVAL OF TRAVEL PPC PEDAL ASSEMBLY Lower the work equipment completely to the ground and stop the engine. Loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Then set the safety lock lever to the LOCK position. 1. Remove floor mat. 2. Remove under cover (Front). 3. Remove screws (1). 1 4. Disconnect 3 PPC hoses (2), and remove travel PPC valve assembly (3). 2 INSTALLATION OF TRAVEL PPC PEDAL ASSEMBLY Carry out installation in the reverse order to removal. 1 Valve mounting bolt: 9.8 ± 1.96 Nm (1.0 ± 0.2 kgm) 2 Hose mounting joint bolt (width across flats: 22 mm): 29.4 ± 4.0 Nm (3.0 ± 0.5 kgm) 30-96