DISASSEMBLY AND ASSEMBLY BUCKET REMOVAL OF BUCKET ASSEMBLY Set the back of the bucket facing down, lower the work equipment completely to the ground, and set the safety lock lever to the LOCK position. 1. Remove lock bolt (1). 1 2. Remove connecting pin (2) between link and bucket. 2 # There are shims installed, so check the number and thickness, and keep in a safe place. 3. Start engine, and retract piston rod, then tie piston rod with wire to prevent it from coming out. 3 4. Remove lock bolt (3). 5. Remove plate (4), then remove connecting pin (5) be- tween arm and bucket. # There are shims installed, so check the number and thickness, and keep in a safe place. 4 6.
After raising work equipment, swing to disconnect bucket assembly (6). Bucket assembly: 400 kg. 30-117