Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD COOLANT WARNING up to the FULL mark. 3 - 71 Always perform t he procedures in th is section befo re startin g the engine eac Do not open the radiator cap unless ne cessary. When checking th e coolant, always wait for the engine to co ol down and check the sub-tank. Immediately aft er the engine is stoppe d, the coolant is at a high t emperatur e and th e radiator is under high internal pressure. If the cap is rem oved to check the co olant level in thi s condition , there is a hazard of burns. Wait for the temperature to go down, then turn the cap slowly to rele ase the pressure and remo ve it c arefully. 1.

Check that t he cooling water in sub tank (1) is between the W marks. FULL and LO 2. If the level is LOW, remove cap (2) and add the engine coolan 3. If there is no coolant in sub tank, fill the radiator with the co olan whose densi ty is indicated in th e density tabl e of cool ant in "CLEAN IN SIDE OF COOLIN G SYSTEM (PAGE 4 -28) through wate r filler (3) at the top o f radiator and t hen, fill th e sub tank with the coolant as well. 4. Check that t problem. 5. After adding coolant, tighten the cap securely. 6. If more cool leakage.