. OPERATION OPERATION CHECK OIL LEVEL IN TRANSMISSION CASE, ADD OIL 1. After starting the engine, run the engine at low idle and check the oil level with sight gauge (G2). 2. If the oil level is low, add oil through oil filler (F). NOTICE CHECK OIL LEVEL IN STEERING AND HOIST OIL TANK, ADD OIL WARNING through oil filler (F). 3 - 74 The oil level chang es according to the oil temp erature, so carry o ut the eting the warming-up operati s, or when the engine is level should be above (G2). When checking th e oil level with the engine st opped, che ck with sight ide line, and make the final c heck with (G2).
When checking the oil level with the engine stop ped, wait fo r 20 mi nutes engine and check with sight gauge (G1) If the oil filler cap is r emoved without releasing th e internal p ressur e, oil will spurt out, so tur n the oil filler cap slow ly to release the internal pressure, 1. Check with sig ht gauge (G).